Our RFID gates precisely control your goods movements at any time!
These flexible gates are adapted to your individual process and integrated into your warehouse or production facility. If required, they can also be equipped with monitors for immediate visualisation of your goods movements. Movements and movement direction of labelled articles or palettes are registered as they pass through the gate.
Our system identifies up to several hundred tags per pass in just a few seconds. The movement direction is recognised so all article movements and relocations are recorded. Only articles that actually pass through are registered, thereby false readings are avoided. Non-moving articles placed or stored near a gate are not registered.
The extremely high accuracy of our solution provides you with a detailed overview of your goods movements. An interface to your stock management program enables precise warehouse management and control in real time.
Our RFID gate simplifies your warehouse management and improves accuracy!
- Fast detection of movement direction
- Incoming and outgoing goods are differentiated
- Hundreds of tags per pass are precisely identified
- Accurate warehouse management and control in real time
- Automated final inspection
- Enables accurate production planning
RFID technology boosts the fully automatic warehouse at implantcast
One of the largest manufacturer of medical implants enhanced incoming and outgoing goods control in their automated Knapp AG warehouse with our solution.
Using our and our RFID gates, orders are now processed in a modern and flexible way that meets the highest quality standards. The customised process software allows the automated validation of expected articles including a check for expiration dates and logging and tracking of all bookings.
Read more about this project here!
- All implantcast products are labelled with RFID transponders
- Bulk scanning of up to 150 products per shipping unit
- Automatic registration of warehouse movements through an RFID gate
- Immediate booking of all products in handling units
- Direct interface to the fully automated warehouse and ERP systems
- Project partner: Knapp AG
Project Manager Knapp AG
A tugger train solution for EVG
Our sophisticated tugger train solution resolves problems with small parts intralogistics in production and ensures security of supply. The required parts are delivered to the assembly stations using a tugger train equipped with RFID technology.
The required parts are delivered to the assembly stations using a tugger train equipped with RFID technology. The loaded transport units are automatically detected and the correct unloading stations visualized. This allows an optimal route to be chosen for only the relevant stations.
The route is displayed on the vehicle terminal and all relevant information shown during loading and unloading processes, allowing handling errors to be corrected immediately. This ultimately improves the overall process quality and ensures accurate production planning.
- Vehicle terminal and mobile device for controlling and operating
- Immediate notification of incorrect loads and wrong transport unit handling
- Articles are brought to the required assembly position at the right time
- Automatic localisation of the tugger train
- Route visualisation for loaded transport units
- 8 factory buildings, 90 assembly areas, 21 stations
Scanning vehicles using an RFID gate on each training circuit of ÖAMTC
At Austria’s largest mobility club, ÖAMTC, our RFID gate solution automatically scans vehicles on practise runs in driver trainings.
Each participant receives a personalised transponder for the duration of the training session which is attached to the vehicle windscreen. The labelled vehicles are detected as they pass the gate on the training circuits. This works for speeds of up to 70 km/h at least.
Additionally, a picture of the scene is taken that can then be directly linked to the participant.
- Automatic detection of vehicles during driver safety training
- Installed on photo stations on training circuits
- Direct association of images to the driver of the vehicle
- Detecting vehicles as they pass with speeds of up to 70 km/h at least
CEO primtec GmbH
Interactive user experience in the visitor centre at the EU parliament in Brussels
The guided multimedia tour through the visitor centre at the EU parliament is a thoroughly modern experience that links media guides with various RFID technologies.
The personalized media guide is the key to an interactive experience of the 21st century.
Detection of the guide when entering specific areas can trigger content on 360° beamers and monitors or just start videos on the visitors multimedia guide. Just by scanning a specific exhibit the visitor can easily get detailed information on his device.
- 3,000 sqm of exhibition space
- More than 2 million visitors since opening
- 700+ media guides
- EU-wide tender
- Automatic localisation of media guides and targeted interaction with visitors while exploring the exhibition
- Near-field technology provides detailed information on specific exhibits
State-of-the-art warehouse logistics in the high rack warehouse at Krenhof
The new automated high rack management system creates efficient warehouse logistics as well as optimal flow of goods to the production process. This is made possible by a comprehensive RFID system covering racks, containers and stackers.
The highly metallic environment with storage locations very close to each other presented the challenge of integrating an RFID system that could automatically book containers to the right storage location up to 12 metres above the ground, without any user interaction, and without any handling errors. Using intelligent algorithms and intuitive software, it was possible to implement this solution in just a short amount of time.
- No handling errors due to fully automatic booking of incoming and outgoing goods as they are loaded
- Web application for a complete system overview
- Transport containers automatically booked to the correct location
- 7,000 storage locations in a high rack warehouse of approx. 2,000 sqm and up to 12 m in height
- RFID system with vehicle terminal
- Logging and tracking of all bookings
CEO primtec GmbH
A comprehensive WMS solution for Coca-Cola HBC Austria
In the state-of-the-art production and logistics centre, we have introduced a modern WMS system including control centre and forklift guidance system to achieve a high throughput of goods and to optimise and automate storage-, removal- and return-processes. Several block storage areas as well as the area of the mobile racks are captured by our system. In order to optimally organise the pallet movements, various optimisation strategies are used at the same time, which are controlled and monitored by our system. Each forklift was easily upgraded with a forklift terminal and thus integrated into our system. All activities can be conveniently analysed and controlled on the browser via a modern dashboard. The information obtained, such as the real-time stock level or even a complete base data overview, enables efficient planning for procurement and production.
Read more about this project here!
- Integration of all suppliers into the GS1 Upstream process
- Dynamic bearing attributes with validation
- Direct interface from the stacker to the mobile rack
- More than 500 pallet movements per day
- Optimised storage/removal strategies
- Project partners Still GmbH and GS1 Austria GmbH
ACHIM GASSER, ALEXANDRA THOMIK
Raw Material Supervisor
Charging cards for the ÖAMTC ePower charging stations
Electromobility is also increasing more and more in Austria. As a result, Austria’s largest mobility club is massively expanding its own charging network ÖAMTC ePower throughout Austria. Together with a steadily growing partner network, more than 4,500 charging stations will soon be available.
Various payment options are available at the stations, including the ÖAMTC ePower charging card. We printed this individual customer card with an RFID tag. This makes charging at one of the many ÖAMTC ePower charging points even easier and more transparent.
The recording of the individual card number combined with the RFID number enables easy recording and processing of the necessary data by the software we developed.
- More than 4,500 charging stations throughout Austria
- Data collection with the use of our software
- Individual customer card printed with RFID tag
- Simple and uncomplicated payment processing
CEO primtec GmbH